Surgex SX-20NE-RT-AR User Manual download pdf (Page 2)

SX-20NE-RT-AR Quick Start Guide Page 2

Changing the IP Address

1. Device Management Utility (DMU). Obtain the

latest DMU from the SurgeX website at

http://www.surgex.com. The DMU provides the

easiest means to find and configure your SX-20NE-RT-

AR for use. It can discover all

SX-20NE-RT-ARs on the local network, display the

current IP address of each, and allow the setting of any

valid IP address.

The DMU can also be used to return an SX-20NE-RT-

AR to its factory default condition. This may be used to

recover an SX-20NE-RT-AR with a lost password.

Highlight a unit in the list and choose menu item Set |

Factory Defaults.

Note: Setting the IP address or performing a reset to

Factory Defaults can only be performed within the first

2 minutes of powering up the SX-20NE-RT-AR. The

DMU will only work with units on the same local subnet

as the PC.

2. Web Page Setup - Manual. From the home page,

click Setup, and then Network. Enter the new IP

Address, Subnet Mask, and Gateway, and then click

Save. Click the Reboot button (or press the reset

button next to the Axess On LED) to restart the SX-20NE-RT-AR with the new settings.

3. Web Page Setup - DHCP. From the home page, click Setup, and then Network. Change the IP mode

from Static to DHCP. Click Save, and then Reboot. The SX-20NE-RT-AR will automatically obtain its

network settings from the DHCP server. Check the server IP/MAC table or use the DMU to obtain the new

settings.

1 2

No comments

Surgex SX-20NE-RT-AR User Manual Page 2