Surgex CM-1115-RT-AR User Manual download pdf (Page 2)

CM-1115(20)-RT-AR Quick Start Guide Page 2

Changing the IP Address

1. Device Management Utility (DMU). Obtain the

latest DMU from the SurgeX website at

http://www.surgex.com. The DMU provides

the easiest means to find and configure your

CM-X-AR for use. It can discover all CM-X-ARs

on the local network, display the current IP

address of each, and allow the setting of any

valid IP address.

The DMU can also be used to return a CM-X-AR

to its factory default condition. This may be used to recover a CM-X-AR with a lost password.

Highlight a unit in the list and choose menu item Set | Factory Defaults.

Note: Setting the IP address or performing a reset to Factory Defaults can only be performed

within the first 2 minutes of powering up the CM-X-AR. The DMU will only work with units on

the same local subnet as the PC.

2. Web Page Setup - Manual. From the home page,

click Setup, and then Network. Enter the new IP

Address, Subnet Mask, and Gateway, and then

click Save. Click the Reboot button (or press the

reset button next to the Axess On LED) to restart

the CM-X-AR with the new settings.

3. Web Page Setup - DHCP. From the home page,

click Setup, and then Network. Change the IP

mode from Static to DHCP. Click Save, and then

Reboot. The CM-X-AR will automatically obtain its

network settings from the DHCP server. Check the server IP/MAC table or use the DMU to

obtain the new settings.

1 2

No comments

Surgex CM-1115-RT-AR User Manual Page 2