Surgex SX-20NE-RT-AR User Manual

SurgeX • 517 North Industrial Drive, Zebulon, NC 27597 Customer Service: 800-645-9721 • Technical Support: 800-645-9721 • Fax: 919-269-0454 • www.surg

SX-20NE-RT-AR User Manual Page 9 V. Initial Set-Up (continued) Manage Open Browser: Opens the web browser interface for the selected AR. Up

SX-20NE-RT-AR User Manual Page 10 V. Initial Set-Up (continued) Setting the IP Address ARs are configured with a factory default IP address

SX-20NE-RT-AR User Manual Page 11 VI. Web Server The Axess Ready web interface provides the easiest means of operating the outlet and chang

SX-20NE-RT-AR User Manual Page 12 VI. Web Server (continued) Setup Pages Setup pages are only available while logged in with Administrator

SX-20NE-RT-AR User Manual Page 13 VI. Web Server (continued) Network IP Mode: Select Static to manually set the IP address using the fields

SX-20NE-RT-AR User Manual Page 14 VI. Web Server (continued) AutoPing The AutoPing feature allows the AR to automatically detect failed e

SX-20NE-RT-AR User Manual Page 15 VI. Web Server (continued) • Action: Select the action to be triggered. None AutoPing not used Power On

SX-20NE-RT-AR User Manual Page 16 VI. Web Server (continued) Schedule The AR can schedule up to 8 recurring power events. For each event, y

SX-20NE-RT-AR User Manual Page 17 VI. Web Server (continued) Passwords Two passwords are used by the AR. The User password allows control of

SX-20NE-RT-AR User Manual Page 18 VII. Command Line Interface (CLI) Protocol The Command Line Interface provides complete setup of all functio

SX-20NE-RT-AR User Manual Page 1 Table of Contents I. INTRODUCTION 3 II. INSTALLATION 5 PHYSICAL

SX-20NE-RT-AR User Manual Page 19 VII. Command Line Interface (CLI) Protocol (continued) Network Commands Command Description Admin Fact Def g

SX-20NE-RT-AR User Manual Page 20 VII. Command Line Interface (CLI) Protocol (continued) AutoPing Commands Command Description Admin Fact Def

SX-20NE-RT-AR User Manual Page 21 VII. Command Line Interface (CLI) Protocol (continued) Event Commands Command Description Admin Fact Def ge

SX-20NE-RT-AR User Manual Page 22 VIII. DxP Protocol Overview The DxP Protocol is a packet-based protocol designed to be extensible. This pro

SX-20NE-RT-AR User Manual Page 23 VIII. DxP Protocol (continued) DxP Packet The packet is broken up into 2 parts: the Header and the Paylo

SX-20NE-RT-AR User Manual Page 24 VIII. DxP Protocol (continued) Commands There are currently 7 command classes. All classes are defined in

SX-20NE-RT-AR User Manual Page 25 VIII. DxP Protocol (continued) eCmnd_io typedef enum{ eIO_null, eIO_changeRelay, eIO_changeRelays,

SX-20NE-RT-AR User Manual Page 26 VIII. DxP Protocol (continued) Payloads TChangeRelay typedef struct{ unsigned char relay; unsigned ch

SX-20NE-RT-AR User Manual Page 27 X. Firmware Upgrades XI. Reset Button The AR can be upgraded via the network if the upgrade feature h

SX-20NE-RT-AR User Manual Page 28 XI. Specifications Physical Model Width Depth Height Weight SX-20NE-RT-AR 12.0” 4.0” 12.0” 14 lb. Temper

SX-20NE-RT-AR User Manual Page 2 Table of Contents (continued) VII. COMMAND LINE INTERFACE (CLI) PROTOCOL 18 PROMPTS

SX-20NE-RT-AR User Manual Page 3 I. Introduction The SurgeX® SX-20NE-RT-AR is a network attached, IP addressed, web controlled AC surge elimi

SX-20NE-RT-AR User Manual Page 4 I. Introduction (continued) Located on the front panel are: • Remote LED • Self-Test L

SX-20NE-RT-AR User Manual Page 5 II. Installation Physical The SX-20NE-RT-AR is housed in a magnetic shielding NEMA enclosure designed to

SX-20NE-RT-AR User Manual Page 6 III. LED Indicators IV. Remote Control Connections AXESS ON The Axess Ready system is On. The AR sy

SX-20NE-RT-AR User Manual Page 7 IV. Remote Control Connections (continued) b) Contact Closure/Latching Switch: The unit will power up when

SX-20NE-RT-AR User Manual Page 8 V. Initial Set-Up Device Management Utility (DMU) The SurgeX Device Management Utility (DMU) provides t