Surgex SX-20NE-RT-AR User Manual download pdf (Page 21)

SX-20NE-RT-AR User Manual

Page 20

VII. Command Line Interface (CLI) Protocol

(continued)

AutoPing Commands

Command

Description

Admin

Fact Def

get autoping Returns all AutoPing settings currently in use. Example:

AutoPing 1 AutoPing 2

IP Address: 10.1.2.36 0.0.0.0

Frequency: 60 10

Fail Count: 3 3

Status: OK OK

Trigger Count: 0 0

--------------------------------------

Mode: Single

Action: On-Latch

Yes

set autoping < 1 | 2 > ipaddress < dotted decimal > Sets the IP address to be pinged for AutoPing 1 or 2. Yes 0.0.0.0

set autoping < 1 | 2 > frequency < 1-999 >

Sets the frequency (how often the ping is sent) for

AutoPing 1 or 2 in seconds.

Yes 10

set autoping < 1 | 2 > failcount < 1-999 >

Sets the number of consecutive failures the AutoPings

must detect before the AutoPing considers the pinged

device to be failed.

Yes 3

set autoping mode < single | and | or > Sets single AutoPin

g (AutoPing 1) or two AutoPing

relationship AND or OR.

Yes AND

set autoping action < none | on-latch | on-follow | off-latch |

off-follow | cycle | cycle-once >

Sets the action to be performed when the AutoPing is

triggered.

Yes None

User Commands

Command

Description

Admin

Fact Def

set password < user | admin > < old > < new > < repeat > Sets the password of the User or Administrator. Yes user | admin

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29

Comments to this Manuals

No comments

Surgex SX-20NE-RT-AR User Manual Page 21

Comments to this Manuals

Related products and manuals for Computer Accessories Surgex SX-20NE-RT-AR